SOP FOR PREPARATION STANDARD AND TEST SOLUTION

  1. OBJECTIVE:

    1. To lay down the procedure for preparation of Standard and Test Solution.

  2. SCOPE

    1. This procedure is applicable for the Preparation of Indicators and Test solutions at Quality Control .

  3. RESPONSIBILITY:

    1. Quality Control officer / Executive is responsible to follow procedure as per the procedure mentioned in this SOP. 

    2. QC Head is responsible for implementation and compliance of the procedure as per this SOP.

  4. ABBREVIATIONS

    1. SOP    :    Standard Operating Procedure

    2. QC    :    Quality Control

    3. AR    :    Analytical Reagent

  5. PROCEDURE

    1. Use purified water for the preparation of solutions.

    2. For the preparation of solution use AR/GR grade chemicals. 

    3. Prepare the solution as per respective standard procedure as per pharmacopeial monograph.

    4. Store all the solutions in cleaned dry glass bottles. Solutions should not be preserved for more than three month. If during usage any change in the physical properties of solution observed then discard the same.

    5. Solutions which are to be prepared freshly is to be prepared as when required.

    6. Record the preparation of the solutions as per the current version of Annexure I (Preparation Record of Indicator / Test Solution).

    7. Label all the solutions properly with complete details as per SOP for Labeling.

Post a Comment

Previous Post Next Post